Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

new BOSCH coil #00059 (0 221 122 345) is not to spec? 200 1988

posted by  tbb2 on  Mon Apr 18 08:18 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 18:57 CST 2014
[RELATED]

I purchased a new BOSCH coil because the secondary resistance was high on my original coil.

The new coil is further out of spec than the original !!
Doesn't this specification limit the power through the distributor and to the plugs?

What, if anything, is getting cooked?

Bosch Coil - OLD, 1988 - (0 221 122 345)
-primary - across terminals 1 and 15 - 1.1 -1.3 ohm
(spec. 1.1 -1.3 ohm)
-secondary - across terminals 1 and high tension
(ignition cable) terminal - 12.18 kohm @ <68 F
(spec. 9.6 -11.6 kohm)

Bosch Coil - NEW, 2010 - (00059) (0 221 122 345)
-primary - across terminals 1 and 15 - 1.1 ohm
(spec. 1.1 -1.3 ohm)
-secondary - across terminals 1 and high tension
(ignition cable) terminal - 13.5 kohm @ 68 F
(spec. 9.6 -11.6 kohm)

1988 244 DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New new BOSCH coil #00059 (0 221 122 345) is not to spec? [200][1988]
posted by  tbb2 subscriber  on Mon Apr 18 08:18 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.