Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

End float on camshaft_Volvo 122s B20 120-130

posted by  blueb20 on  Wed Apr 20 15:41 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 7 14:14 CST 2013
[RELATED]

Hi all,

I'm in the process of rebuilding a B20 engine with an Isky VV71 camshaft.
I've installed the camshaft with it's spacer and NEW retaining flange in front and i've obtained an end float of 0.2mm.
The specifications in the book are way under that of 0.02mm.

What needs to be done to remedy this?

I'm using the B30 steel timing gears and have tightened the camshaft nut adequately but still find the end float too high.

Thanks in advance.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New End float on camshaft_Volvo 122s B20 [120-130]
posted by  blueb20  on Wed Apr 20 15:41 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.