Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do you need to remove cam sprocket when removing head? 900 1992

posted by  BrickDad on  Sun May 1 09:41 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:17 CST 2014
[RELATED]

OK, further into head gasket replacement. Head is loose, all bolts and manifolds detached. Now it looks like I must remove either the cam sprocket or the back portion of the timing belt cover in order to slide the head to the intake side. Is that right? Which is better?

Thanks in advance.

Brian Mee






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do you need to remove cam sprocket when removing head? [900][1992]
posted by  BrickDad  on Sun May 1 09:41 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.