Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2022 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Drive line mount, universal joint sizes and flex joint 700 1990

posted by  DPNY on  Tue May 10 10:23 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 18 18:45 CST 2014
[RELATED]

I have a weird whine that comes from drive train as I let the clutch out. It goes away when clutch is engaged. It has been there a long time but is getting worse.
(I have looked at belts, harmonic balance, clutch already.)

I am going to replace the drive line mount.
What size do I need?

Also the Flex joint? Is this an upgrade to some older part? Or should I replace it also?

And also the universal joints. I am not sure what size I need for the the universal joints.

Do I have to measure these parts or can it be figured out from the model?

1990 740 Turbo Sedan Manual Transmission.

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Drive line mount, universal joint sizes and flex joint [700][1990]
posted by  DPNY  on Tue May 10 10:23 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.