Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Has anyone made their own Overdrive Solenoid bypass plate ? 200 1993

posted by  philvo on  Tue May 10 12:32 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 14:26 CST 2014
[RELATED]

I have changed the fluid in the trans and now it shifts better but no 4th still. I think the solenoid is junk from the neglected fliud. I have a solenoid off my parts car I can cut the groove in to make the bypass but wanted some tips if any of you have done it. I thought of IPDs kit but too cheap to spend the $39 when I can probably make it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Has anyone made their own Overdrive Solenoid bypass plate ? [200][1993]
posted by  philvo subscriber  on Tue May 10 12:32 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.