Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

93 945 Ignition Lock Cylinder Seizing? 900 1993

posted by  Milanomike on  Tue May 10 17:54 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 11 22:27 CST 2014
[RELATED]

OK, need the boards wisdom again. This time its the ignition lock cylinder. It seems like it's seizing up, so I've cleaned and lubed it and it's much better, but since daughter will be driving it, i figured I'd replace or overhaul at locksmith.

Read the FAQ, but it's not clear how to get at the switch, bottom of dash is in the way and metal support is under the switch, not sure if I can just remove the cylinder or must remove the assembly. Any thoughts here, this is a std 945 no tilt steering wheel. As always a push in the right direction is highly appreciated.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 93 945 Ignition Lock Cylinder Seizing? [900][1993]
posted by  Milanomike  on Tue May 10 17:54 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.