Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230F with LH 2.2 into 83 Car - help 200 1983

posted by  KG4BKD on  Tue May 17 00:26 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 29 07:10 CST 2011
[RELATED]

I have been working on putting a B230F engine into an old 83 wagon that I have. The donor car here was an 87 wagon. I have everything from the 87 to go in the 83. So far the only real snag I have run into is the connector from the main wiring harness to the fuel pumps near the ECU. The 83 car has a flat 3 pin connector and the LH 2.2 harness has a square 4 pin connector. I have been reading around but cannot seem to find a straight answer as to how I should make the connections.

I am missing lots of parts from the original LH 2.0 system and the donor engine ran perfectly when removed....this is why I'm doing this conversion.

If anyone knows please let me know. I just want to make sure I don't hook wires up incorrectly here and damage parts.

Thanks in advance!!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230F with LH 2.2 into 83 Car - help [200][1983]
posted by  KG4BKD  on Tue May 17 00:26 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.