Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Glove box Clam shell dorr 200 1989

I found this during my SEARCH http://www.brickboard.com/RWD/volvo/1415644/220/240/260/280/glove_box_door_exterior_trim_loose.html

Not sure if we are talking about the same thing.
The door on the glovebox appears to be like a Clamshell design. The inner shell with the Mirror and the outer. Although my box juts decided to separate so the top of the door hangs away from the dashboard about 1/4". When I try to pull it apart further it seems like it has a real positive stop to it. As if screws loosened up but did not come all the way out. I pulled the small chrome/black trim off in hopes of seeing Screws.. nothing.
What holds these two halves together? I thought maybe glue but it is loose and wont fully separate. As I type this I'm thinking: Lemme go back and take out the lock cylinder.. maybe that's holding it.
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html http://cleanflametrap.com/tony/






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Glove box Clam shell dorr [200][1989]
posted by  TONY H subscriber  on Sat Jun 25 05:41 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.