Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wiper blows fuse on high speed only no matter what motor. Wiring, switch, relay? Help! 200 1982

posted by  jgreenwood on  Mon Jul 11 11:42 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 11 19:10 CST 2011
[RELATED]

Okay. I have read enough posts on this Brickboard to start getting real nervous about this issue. The fuse blows every time I put the wiper on high speed. Intermittent works fine. Slow works fine. I put a new motor on. The same. I switched the old relay to another old relay I had sitting around. Same issue. The new ground strap on the new motor was attached to one of the bolts underneath that mount the motor. IT seems correct. I think I have eliminated the motor as the issue. Does this sound like a switch problem? Since it is the high speed that blow the fuse I am assuming that the draw is greater thus blowing the fuse. I need some help on this one, guys. This is the only thing left before getting this beast inspected. New relay? A different switch? Other wiring issues?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiper blows fuse on high speed only no matter what motor. Wiring, switch, relay? Help! [200][1982]
posted by  jgreenwood subscriber  on Mon Jul 11 11:42 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.