Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Anyone-experience with aftermarket control arms? 200

posted by  1990Volvo240 on  Thu Jul 21 15:41 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

Hi,

Has anyone had any experience with aftermarket control arms? ie-Dorman, Meyle, Scantech?

I need to replace the ones on my 92 245 because there's a rust at the sway bar end link brackets-seperating the bracket from the control arm.

The arms on the one 240 in the junkyard around here are rusted. New OEM ones are pretty steep-especially since I just sprung for new OEM taillights due to the old dead Estonia ones that were on my 90 244.

Thanks,
Travis






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anyone-experience with aftermarket control arms? [200]
posted by  1990Volvo240 subscriber  on Thu Jul 21 15:41 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.