Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

a/c fittings don't fit. 200 1990

posted by  chup on  Wed Jul 27 06:24 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 9 14:02 CST 2014
[RELATED]

So over the past couple of years I've rebuilt my a/c system with the conversion kit and blah, blah, blah.
And after having more than a few local a/c mechanics tell me they could not work with the high side shrader valve I decided to just get some R134a and stuff it in there through the compressor's new fitting. It was then that I found out that the R134a fitting which came with the conversion kit does not work with the R134a hose sold at my local NAPA.

Solution? How 'bout I go to my most friendly local auto parts store, buy an in-line R134a fitting, install it into the over the engine a/c hose and then stuff some R134a in there.
Any thoughts on that?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New a/c fittings don't fit. [200][1990]
posted by  chup  on Wed Jul 27 06:24 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.