Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Update on the 60A ignition fuse/no start situation: 200 1993

posted by  mr.zorak on  Sun Sep 18 13:13 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 3 10:08 CST 2014
[RELATED]

I replaced the burned 60A pal fuse. It so far has not failed to start. However, sometimes when I crank it there is a 1-1.5 second pause before it catches. It has not failed to crank however. Do I need to try anything else, like possibly cleaning the contacts on the starter? Wonder if a little corrosion there could be causing that "hitch in my getalong"?

Thoughts?
--
93' 240 Classic Wagon 220K & 92' 740 Wagon Regina/Rex 90K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Update on the 60A ignition fuse/no start situation: [200][1993]
posted by  mr.zorak subscriber  on Sun Sep 18 13:13 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.