Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

large Volvo part number at AC fill port on dryer question 200 1989

posted by  RobCooper on  Thu Sep 29 22:34 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 13 17:31 CST 2014
[RELATED]

My R12 system needs a boost. Compressor engages but there are bubbles in the site glass on dryer. No cool air. Right off the side hose on the dryer is a black cap with Volvo part number. I unscrewed it to find a o ring seal to it. Looks like I got some small leaking coming from this is fill port at the center pin. But the cap must add extra leak protection with the o ring, so I think I will be ok for awhile after the recharge.

So, the ? is, the port under the cap is not typical R12 fitting. How to fill? Use S port on back of compressor? I got a guy to fill with R12 for $70. I want to make sure he can do it b/c I don't think he would have a Volvo adaptor for this volvo fitting.

Agrees?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New large Volvo part number at AC fill port on dryer question [200][1989]
posted by  RobCooper  on Thu Sep 29 22:34 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.