Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C filler port placement location 200 1986

posted by  Xraybob on  Tue Oct 4 05:57 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:32 CST 2014
[RELATED]

I was at the boneyard this past weekend and found an a/c filler port spliced into the the a/c hose that crosses over the valve cover. Got home and attached my 134a a/c connector that comes with the little cans of freon.....and it snapped onto it perfectly. Since my system has been converted to the 134a system and it's a real pain to get to the filler port buried on the back of the compressor, what's there to loose from tying this into that hose? I know I have to have the system evacuated and recharged, but it would make life so much easier. Thanks.
--
'86 sedan with 464,000 miles on the original engine and automatic transmission






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C filler port placement location [200][1986]
posted by  Xraybob  on Tue Oct 4 05:57 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.