Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel feed line between main pump and accumulator part number needed 200 1980

uid 2796's pic
posted by  bulletproof on  Sat Oct 8 14:53 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:02 CST 2014
[RELATED]

This is on my '80 242.

Look at what some idiot mechanic did before I owned the car. Couldn't bother to order the correct part even though the shop that did this was in Oregon which is Volvo Mecca in the U.S. Instead, they chose to solder a copper tube to the barbed fittings.

I must say it has held up in service. But I needed to replace the main pump and as soon as I saw this I knew I was screwed. One of the solder joints broke as when I tried to loosen the connection. Also, I'm thinking the big acorn looking nut is not correct either but I can't recall at the moment.

So I need the correct part. And I'm not seeing it listed for the 1980 model year.

Is 1312297 correct for my year?

This is why we work on our own cars, isn't it?

I am extremely pissed. And not in the British sense. Although I may be later.

--
'80 DL 2 door, '89 DL Wagon







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel feed line between main pump and accumulator part number needed [200][1980]
posted by  bulletproof subscriber  on Sat Oct 8 14:53 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.