Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

connector plug for ignition control module / ignition amplifier / power stage 200 1989

posted by  jomarex on  Tue Oct 25 14:44 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 5 11:56 CST 2014
[RELATED]

Kinda funny how many names there are for this little part...

This car didn't run for awhile, and it turned out that was just because this connection was corroded. My son "cleaned" it -- just scraped it off with a screwdriver -- and it ran for awhile. Now it's got some massive hesitation on acceleration, occasionally at first but now won't usually go at all.

So I cleaned it all better, but looking at the plug, I only see five connectors for the six prongs that are in the ignition control module. Can't really see what's going on in that sixth slot, but it doesn't look like it would actually be making a connection.

This is the newest 240 I've had, and my other one doesn't have an ICM, so can't look at it...

Will I have to replace that plug?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New connector plug for ignition control module / ignition amplifier / power stage [200][1989]
posted by  jomarex subscriber  on Tue Oct 25 14:44 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.