Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Trailing Arm Bushing 200

uid 29404's pic
posted by  punk240 on  Tue Nov 8 18:17 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

I've got every damn bushing in this car replaced, except the front TABs.
What are some of the Shade Tree Methods for removing/installing? Pretty well versed in the Rear TAB method, just curious if there are any deviations from it for the Fronts.

For anyone whose on the fence about the Polys for the Rear Control Arm Bushings. I had a SuperPro fail on me and they warranty'd me for the cost of shipping. DHL screwed it up or the grounds crew here are outright thieves. But I discovered that the at-cost is $22.52... yet shipping is nearly $27. This was a 4 month long fiasco that allowed me to see that the convex washers must be mounted bowl-side OUT.
--
'92 244 w/ M47 (Hydra, ipd bars and springs, bilstein, urethane bushings)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Trailing Arm Bushing [200]
posted by  punk240  on Tue Nov 8 18:17 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.