Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil in intake hose? 1991 240 sedan

posted by  keithostertag on  Thu Dec 1 18:42 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 17 15:10 CST 2014
[RELATED]

Some of you have been helping me with advice with my 1991 240 sedan (300K), thank you I am learning a lot.

I had been having rough idle with occasional stalls at traffic lights. The codes, and the advice, pointed to cleaning the throttle body.

When I disconnected the intake hose at the MAF meter I was surprised to see oil- a fair amount, pooling in the undercurve of the hose.

How could this happen, and what does it signify? I mean, isn't that unusual and unwanted?

Later I noticed that the hose has a tear in it which probably contributes to my problems...I have cleaned the TB and am waiting for a new hose to arrive from FCPGroton. I've pulled the intake manifold and the gasket is fine. The flame trap was dirty but not unreasonably so. I also replaced the oil breather/separator.

Keith







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil in intake hose? 1991 240 sedan
posted by  keithostertag subscriber  on Thu Dec 1 18:42 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.