Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil leak near dipstick tube 900 1993

posted by  SLong on  Tue Dec 13 08:20 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 19:52 CST 2014
[RELATED]

Hello,

I have a 1993 940 Turbo. There is an oil leak that appears to be coming from around the dipstick tube (where the tube goes into the engine block on the driver's side, next to the oil separator box). I read in the FAQ that this can happen and perhaps a new seal is needed. I called Tasca Volvo and they did not find a part number for the seal (couldn't tell if there was a seal). They suggested ordering a new dipstick tube and if it needs a seal, it would come with the tube. Does anyone know what kind of seal is in there, if at all, and/or what the part number would be? How involved is this repair? Do I just need to pull the dipstick tube out? Is it just a friction fit? I am hesitant to take this apart without the proper parts on hand since I don't want to make the leak worse.

(I have replaced the oil separator, thinking that this was the source of the leak, but it didn't fix it.)

Thanks!
Steve





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil leak near dipstick tube [900][1993]
posted by  SLong  on Tue Dec 13 08:20 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.