Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Dead in the driveway 200

posted by  JimN696 on  Sat Jan 7 15:50 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 6 17:14 CST 2013
[RELATED]

Out for dinner last night and the car was hard starting on the way home. Today it started right up in the morning, but was hard starting when I left gym. I was thinking fuel pressure, maybe the regulator, maybe the warm temps today were causing some condensation.
Because it was so beautiful here today, I decided to change the oil. While looking over the engine compartment, I noticed that the weatherproof fuse holder for the FI fuse was slightly discolored, but ignored it until I tried to start the engine, and it wouldn't start. I popped open the cover and found a totally toasty fuse welded into the holder. Upon closer inspection, the insulation on the wires was discolored, too. I replaced the holder and fuse, and the problem was gone. Lucky for me I was in the driveway when it finally failed. Keep an eye on those fuse holders, you never know when they are going to fail.
--
http://www.facebook.com/album.php?aid=53563&id=1189132524&l=75a2564d60






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Dead in the driveway [200]
posted by  JimN696  on Sat Jan 7 15:50 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.