Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bosch Fuel Pump O-Rings K-Jet 200 1979

posted by  Budcoldweiser on  Sun Jan 8 16:33 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 30 15:03 CST 2014
[RELATED]

My fuel pump is leaking. I discovered this when as I set out to replace the fuel accumulator. The leak is occurring on the intake end of the pump. It is a very slow drip around the area where the four screws hold the roller assembly in place. Upon taking the pump apart, I was able to see that the o-rings had deteriorated, particularly on the motor side of the assembly. I went to the hardware store and found what I thought would be the perfect replacement. However, they were a little to thick. I went back to the hardware store and got some thinner o-rings. They didn't work either.

Does anyone know where I might be able to order o-rings that would work?
--
1966 122s, 1968 142s, 1969 144s, 1979 245dl, 1989 244gl






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bosch Fuel Pump O-Rings K-Jet [200][1979]
posted by  Budcoldweiser subscriber  on Sun Jan 8 16:33 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.