Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Windshield replaced- but is this normal? 1991 240 sedan 200

posted by  keithostertag on  Thu Feb 2 19:41 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 17 15:10 CST 2014
[RELATED]

I sold some stuff recently and with the money decided to treat myself to a new windshield. Two main reasons: one, there were several spots of rust that needed to be taken care of under it (called the pinch weld?) and two, there was a repaired break at eye level that bothered me. Wow, does a new windshield look nice- like it isn't there!

I paid a little extra to get a USA made windshield- from PPG/PGW. I could not source a made-in-USA one from Pilkington. $250 installed, plus $150 to the body shop for the rust repair. (a splurge!)

Anyway, though it looks good there is a section at the center lower edge of the windshield gasket where it is loose. It is as though there are two pieces of metal that come together under there but miss meeting by about 2 inches so there is nothing underneath to support it. See photo. Is this normal? Or did the installer miss some detail?

Thanks,
Keith Ostertag
--
1991 240 Sedan B230F LH3.1 M47 300K miles







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Windshield replaced- but is this normal? 1991 240 sedan [200]
posted by  keithostertag subscriber  on Thu Feb 2 19:41 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.