Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

780 Air Dam and External Trim Plastic Material 700

posted by  volvoseeker on  Wed Feb 22 17:59 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 27 19:38 CST 2013
[RELATED]

Hi:

I would like to do some plastic welding and bonding on my 1988 780 Bertone air dam and also freshen up the black trim on sections such as the two "accordion" trim sections that attach to the front quarter panels at the bumper on each side.

The trim from the quarter panel has Volvo part# 1341340 (and #1341341 for the opposing side). It is also imprinted with 21 202 0060 and what looks like the letters ag with a shamrock (4-leaf clover) above the letter "g".

The air dam is stamped part# 1341511 and 21 202 0090. It also has the letters "ag" with the shamrock above the letter "g".

I would appreciate knowing what these markings mean (part number is obvious...) and what material/plastic these parts are made out of so that I can get the correct kind of plastic for welding and/or epoxy from 3M or others for crack repair, priming and painting.

Thanks in advance for info from anyone who has tackled these already!
SM






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 780 Air Dam and External Trim Plastic Material [700]
posted by  volvoseeker  on Wed Feb 22 17:59 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.