Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

960 B6304 valvetrain interchangeability 900 1992

posted by  ajtofelfa on  Wed Apr 4 04:24 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Apr 5 08:00 CST 2012
[RELATED]

Hello,

I have a 1992 960 B6304 with a 143-tooth camshaft belt. Sure enough, it ripped the belt and bent a bunch of valves. I got another engine from a 1993 model and it has the 148-tooth belt. Initially I wanted to pull the head and the valvetrain from this later motor and put it on mine to replace the bent up stuff. But now I don't know if that's possible.

Are the heads with different camshaft belt system interchangeable? I suppose the water pumps and the tensioner pulleys are different, too, but I want to buy these new anyway. I just want to know if they can be mounted on an engine with the older setup.

Thanks for any input,

Gabor






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 960 B6304 valvetrain interchangeability [900][1992]
posted by  ajtofelfa  on Wed Apr 4 04:24 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.