Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

oil pressure switch tough to remove 200 1992

Hi folks, I had the oil pressure switch go bad on the 92, and just got the replacement from FCP. Ok, got a 24 mm socket but man that thing is tight! The engine is stone cold, should i warm it up and see if that works? I am afraid of breaking the thing off, so any advice beyond PB Blaster would be appreciated!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil pressure switch tough to remove [200][1992]
posted by  someone claiming to be Teal 240  on Thu Apr 19 18:50 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.