Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need O-ring for cold start valve on 1991 240 200 1991

uid 38618's pic
posted by  Engine41 on  Sat Apr 21 13:44 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 18 09:00 CST 2014
[RELATED]

HELP! I finally found the vacuum leak on my 240.... it was the cold start valve o-ring. However, It seems impossible to find one. Many web sites LIST the o-ring but in reality it is not an o-ring but a 8.2 x 11mm copper washer. I have talked to several venders and they all say I am correct and they had never noticed the mistake. I need my car so I was even desperate enough to buy a whole new cold start valve to get the blasted o-ring.. well, even the brand new cold start valves do not come with the o-ring. Does anyone know or have the correct o-ring for a 1991 240 LH 2.4 cold start valve??? Could really use some help :)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need O-ring for cold start valve on 1991 240 [200][1991]
posted by  Engine41  on Sat Apr 21 13:44 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.