Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1989 head and block pics questions 200

posted by  Nel621 on  Sat Jul 21 20:38 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 12:48 CST 2014
[RELATED]

I know volvos but this is my first cylinder head gasket adventure.Some of the coolant passages have some crud in them.If I clean this out and some falls in the hole will it flush out when I open the drain petcock? Also note one piston is lighter in color.I guess this where the gasket failed?
Photobucket
Also the head has no warp to it when measuring with a straight edge.Do I just have the head hot tanked and cleaned up by the machine shop?Also the gasket kit came wuth a bunch of seals,I guess for the valves.Do I give these to the machine shop and have tehm install them?Like i said I have never done a headgasket on any of my volvos.TIA
Photobucket
Photobucket






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1989 head and block pics questions [200]
posted by  Nel621 subscriber  on Sat Jul 21 20:38 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.