Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Struggling With Motor Mount rReplacement 200 1992

posted by  83GLT on  Thu Apr 4 21:42 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 13 10:56 CST 2014
[RELATED]

I went to start a motor mount replacement job tonight only to realize there is no way the nuts on the lower bracket are coming off. The whole plate under the crossmember is one piece of rust - including the nuts. I read a post on another forum that details how to do the job by loosening the lower mount nut and removing the mount with the upper bracket. But I can't figure out how to get a socket/wrench onto the lower mount nut. This applies to both sides. Any thoughts/tips would be greatly appreciated!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Struggling With Motor Mount rReplacement [200][1992]
posted by  83GLT subscriber  on Thu Apr 4 21:42 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.