Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tranny pan drop 200

posted by  Indy452 on  Sun Apr 14 15:19 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 11 08:25 CST 2014
[RELATED]

How do you remove a tranny pan when no matter how hard you try, you are unable to loosen the flange nut for the filler tube. And, you can loosen, but not totally remove the two 18mm bolts that are holding the filler tube in place? Why are there two brackets when one would probably suffice?

I'm at a loss here...If you cannot back the top starter bolt out because the body is in the way what do you do?

Can I cut the filler tube and patch it up with some flexible rubber hose after the service is done? Its mickey mouse I know, but not sure what else to do.....I really want to access the pan and filter in this car since it hasn't been done for awhile....

Thxx..






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tranny pan drop [200]
posted by  Indy452  on Sun Apr 14 15:19 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.