getting ready to install ecodes in the 940, trying to avoid hacking up the harness as much as possible (probably inevitable for the turn signals/running lights). The factory fog light connectors appear to be Delphi Metri-pack 280, which seems utterly bizarre given that such a product is used NOWHERE else on Volvos of this era. Can anyone familiar with this advise whether or not a matching male plug is sold to connect to the existing female connector on the harness--and if so, do you have the delphi part #?

this _seems_ suspiciously similar to what's on the car now:
http://www.mouser.com/Search/ProductDetail.aspx?R=12124819-Bvirtualkey63000000virtualkey829-12124819-B

My car is non-fog from the factory. Have already installed relay and 2-position fog light switch in dash, but have gone no further with install until I know what can be kept plug-and play and what must be spliced. Ideally I would have a short harness with the 4-plug connector to the Ecodes on one end and connectors for the existing headlight and foglight plugs on the others. That would also make it easy-peasy to add in underhood headlight relays should I wish to down the road.

John
--
1989 245 245K / 1993 945 131K