Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

brake failure light, spongy pedal after rotor/pad replacement 1984 245 Ti 200 1984

posted by  philvo on  Fri May 3 10:23 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 14:26 CST 2014
[RELATED]

Just replaced my front rotors, pads and hardware and was depressing the brake pedal like I always do after replacing pads etc. the brake warning light came on and the pedal sinks halfway. No leaks from the calipers or octopus junction / warning valve. I didn't open any brake lines so don't think I have air in the line. Is my master cylinder leaking internally or do I need to just bleed the brakes. maybe a new warning valve kit ?

How do I tell ?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brake failure light, spongy pedal after rotor/pad replacement 1984 245 Ti [200][1984]
posted by  philvo subscriber  on Fri May 3 10:23 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.