Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Camber adjustment Dimple on Strut Tower 200

posted by  dobber13 on  Sat Jun 22 20:04 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

84 244 ti, On the strut tower there is the adjustment by loosing the 3 bolts.There is a Dimple by the plate.If you line this up with the 3rd notch in on both sides would that be close to 0 degree's? Is that factory setting?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Camber adjustment Dimple on Strut Tower [200]
posted by  dobber13 subscriber  on Sat Jun 22 20:04 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.