Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

LH 2.2 AMM removing the plug 200 1988

posted by  Propshaft on  Fri Jul 12 03:19 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 6 14:30 CST 2013
[RELATED]

Hi, folks,

I would like to adjust CO on a B230F with LH 2.2.

At the AMM is a plug which can be removed. But I can´t......

There are still two holes drilled in the plug (previous workshop?), and I can rotate the plug.
But if I try to pull the plug with a plier it resists heavenly.

Any idea how to pull it out?
Have I to dremel around the black plastic tube?
Or can I threaden the plug and screw a bolt in to pull at? But if yes how deep?

Any pictures of the adjusting screw under the plug are welcome, if anyone has this.

cheers from Europe!

Michael





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New LH 2.2 AMM removing the plug [200][1988]
posted by  Propshaft  on Fri Jul 12 03:19 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.