Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Hall Sensor 700 1988

posted by  DABM on  Mon Aug 5 22:58 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Aug 7 18:21 CST 2013
[RELATED]

Voltages on the Hall Sensor connector are:
11V red to ground and 4V blue to ground (should be 5V?)

So I removed the distributor and drilled tiny holes on the connector housing opposite the bars so that I can measure voltages when the connector is plugged into the distributor:
11V red to ground and 7V blue to ground (gained 3V).

Does this mean that I have a voltage leak from red to blue in the Hall Sensor?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hall Sensor [700][1988]
posted by  DABM  on Mon Aug 5 22:58 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.