Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

KOYO Outer Tie Rod Ends, Difference from CAM, ZF, TRW 900 1993

posted by  jd620 on  Fri Nov 8 09:51 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

What is the physical difference of the KOYO outer tie rod ends and the CAM, ZF, TRW outer tie rod ends. I have cars with both types amd would like to make sure the car with the 1 on the lower right of the Product plate indeed has a KOYO rack and tie rod ends since the car with the KOYO had been in a collision a few years before I got it and maybe the rack type was changed (I have no reason to believe it was but want to be sure). I want to rebuild the front end with new struts, ball joints, and tie rod ends.

I checked the diameter of both type inner tie rod ends that go into the outer tie rod ends and find both to be about .555 inches on my caliper.

Thanks
--
Mine: 4-940s running, 2-740 and 1-940 parts cars, and 3 1959 John Deere 630s (1 for parts), dtr1:3-940s, dtr2:1-740






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New KOYO Outer Tie Rod Ends, Difference from CAM, ZF, TRW [900][1993]
posted by  jd620  on Fri Nov 8 09:51 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.