|
OK I checked for wiring continuity from the Drivers Side door lock all the way to the Plug that connects into the Central Locking Relay and also the functionality of the Central Locking Relay. It is all good. I do get continuity when I pull-up or push-down on the Drivers Side Door Lock Inside the car. I do not have the truck opening function with this particular Central locking system so there are No frayed wires shorting anywhere.
Prior to this failure all the 3 door locking motors >>Passenger side front and both rears were working fine and the Clock & Glove Box Light were also working. Drivers side does NOT have a motor.
Again, the other 2 functions on FUSE #8 the Center Light and the Trunk Light ARE working off that same fuse.
Any ideas or suggestions would be very encouraging.
Thanks,
Bill
|