Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'93 940 Itermittant Speedo 900 1993

posted by  Marlin Mangels on  Mon Jan 20 08:40 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]

I've checked the FAQ & searched the archive. I found bare wires above the sensor connector so I taped them. Male and female contacts appear ok, they're both shiny & clean. After re-connecting the harness, the speedo will work ok for about 3 minutes, then quit. It does this on the lift as well as on the road (I had to shut it off for an hour to retest). Should these symptoms lead me to the head, wiring, or sensor as the next step? Will the sensor work for a while, then stop? Would having the wires bare and I assume shorting out, damage the sensor?
Thanks.
Marlin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '93 940 Itermittant Speedo [900][1993]
posted by  Marlin Mangels subscriber  on Mon Jan 20 08:40 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.