Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear control arm bushing loose 200

posted by  jstraw on  Tue May 27 12:23 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 09:10 CST 2014
[RELATED]

I've been chasing down a clunk in the front suspension of my '90 240. When I went to replace the rear control arm bushing for the left side, I was able to press out the old bushing using my vise. When I tried to install the new bushing, it slid all the way in without a press. Both old and new bushings are Volvo branded parts and have matching part numbers.

What gives? I'm pretty sure the new bushing should press in tightly. Do I need a new bracket?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear control arm bushing loose [200]
posted by  jstraw  on Tue May 27 12:23 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.