Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

All Metal Heater Control Valve ? 900

posted by  Mike91 on  Wed Jul 2 11:55 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 17 19:52 CST 2014
[RELATED]

In a thread last April there was some discussion of using an all metal Jaguar Heater Control valve as a replacement for the metal/plastic or all plastic 940 valve.

The Jaguar part number is CBC002536. FCP has a genuine Jaguar version for about $90 and there are aftermarket versions in the $40-$50 range. Has anyone found out if these all metal valves will work in a 940 ?

A few years ago I purchased an aftermarket all plastic valve but was wary of installing it. I decided to buy a genuine Volvo valve from Tasca - it turned out to be all plastic and was identical to the aftermarket valve. The original metal/plastic valve in my 1994 940 was still in good condition so I never replaced it. Now with 210K miles on the car, I want to replace the valve before it breaks.

A Motorcraft YG136 metal/plastic valve will work if I cant find anything better.

Thanks,

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New All Metal Heater Control Valve ? [900]
posted by  Mike91  on Wed Jul 2 11:55 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.