Could someone advise as to how to pull the front and rear bumper covers on this car. I know that the front bumper covers have tabs that go through the aluminum backing bar and that the wipers must be removed. How are the front bumper covers attached to the brackets on the side of the car.

On the back bumper covers there are two bolts on each side which can be reached from inside the trunk. One is above the other and there is a plastic tab in between. Do these bolt directly to the bumper cover, or do they bolt to a bracket on which the cover sits. The lower bolt spins on both sides, does this bolt have to come out to remove the cover or is there some other trick?

Thanks for your input.