Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

High pressure switch for converted 134a system 700 1990

posted by  WD on  Tue Sep 23 15:38 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 00:17 CST 2014
[RELATED]

Does anyone have a solution to adding a high pressure cut-off switch to a converted 134a system? I had my existing high pressure relief blow a while back and plugged the opening--then I added a switch in place of the Schroeder(sp) valve on the compressor, but that is far from ideal. Is there a combination high/low switch that can be used at the receiver/dryer?

thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New High pressure switch for converted 134a system [700][1990]
posted by  WD subscriber  on Tue Sep 23 15:38 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.