Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front End Work

posted by  1985_740_turbodiesel on  Tue Oct 14 20:15 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 21:44 CST 2014
[RELATED]

1992 240. I'm in MN so my lower control arms as rusty as all get out. I'm replacing with new. I need to do a ball joint as well and two outer tie rod ends. I figured I might as well just do everything, get an alignment and get it over with. Will I need a hydraulic press to put in/press out the bushings?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front End Work
posted by  1985_740_turbodiesel  on Tue Oct 14 20:15 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.