Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Main intake tube - two hose connections: What are they supposed to connect to? 200

posted by  swebb CO on  Wed Oct 22 10:43 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:52 CST 2014
[RELATED]

[This is a repost - I posted to the general RWD forum and got no responses, so I figured maybe I was getting overlooked so I am reposting to the 200 forum]


My main intake tube going from the AMM to the throttle body has 2 connections for smaller (1/2" or so) hoses. The one toward the front of the car goes to the idle air valve. The one toward the back of the car is connected to nothing at all.

What is it supposed to connect to?

In this picture I see a hose (right side of TB) that looks like it would be the one...

http://www.threefattigers.com/Protocore/Volvo/B230Fb_2436.JPG

Thanks.

Steve







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Main intake tube - two hose connections: What are they supposed to connect to? [200]
posted by  swebb CO  on Wed Oct 22 10:43 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.