Sages,

1989, 245 DL, manual, 328k miles on it.

Took my cluster out last night and soldered a few connections that appeared to be cold solder joints. Put it back in and all seemed fine.

Drove it this morning and the odometer works fine, but here is what does not work:
1. High beam light no longer illuminates, but the high beams do work,
2. Cruise control will not work, though the brake lights work as they are tied to the same fuse, and finally,
3. The shift up arrow indicator no longer works as well, but the bulb is fine as it illuminates when I turn the key.

At first I thought maybe I had the cruise control and up shift wire backwards, but I took a look this morning and they are fine.

Any and all help here are greatly appreciated.

Thanks in advance,

Matt