I was replaced the left rear taillight on my 1995 940 wagon. I used a white light socket for the lower light/brake light. and somehow that shorted out and burned out the bulb. Replaced with a proper black socket andnew bulb. But now all the lights stay on in every position of the light switch and high beam only works when you hold back the stalk. I removed the headlight relay. this caused headlight switch to operate in the opposite way, lights on in off position,lights off when the switch is turned to on. I read somewhere that the 1995 940 uses two headlight relays. Does anyone know where the second one is located if in fact there is a second relay. Any other thoughts on what could be causing my car to be so confused.
Thanks