Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 Water Pump: Broken Stud

posted by  hydlide on  Wed Mar 11 10:46 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Dear Brickboard,

After replacing the water pump on my 1993 240 wagon I found a substantial coolant leak around the heater return pipe. I stupidly tightened the nut on the stud above the pipe instead of the nut/bolt on the pipe itself and I broke the stud.

Now I need to remove and replace the stud so I can re-attempt to properly install the water pump. I tried using vise grips, but this just further damaged the broken stud. How can I remove the stud?

Also, is this the correct replacement stud?
http://www.ipdusa.com/products/10443/121871-water-pump-stud-b230f-b230ft-b234f







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 Water Pump: Broken Stud
posted by  hydlide  on Wed Mar 11 10:46 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.