Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Blower motor brush brackets? 1800

posted by  ha1156w on  Sun May 3 13:51 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 8 00:29 CST 2012
[RELATED]

Checked the search and didn't come up with a suitable solution. Have an 1800ES that needed the iffy blower motor rebuilt mechanically. Taking it apart it had the usual siezed bearings, but one of the plastic brush brackets broke in the process, no longer allowing the spring to clip in. Does anyone sell replacements for these or am I stuck buying a whole new motor? The sad part is that it looks like it could be easily 3D printed but I don't have access to one of those critters yet.

Thanks!
--
88 740ti 260k and counting....






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Blower motor brush brackets? [1800]
posted by  ha1156w  on Sun May 3 13:51 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.