Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

remove plastic trim for shifter. Shifter knob is a big fat problem. 200

posted by  DogsRGood on  Sun Jun 21 23:46 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 7 04:57 CST 2014
[RELATED]

1985 automatic 240. A guy wants to buy the plastic trim rectangle that mounts on the tunnel and has the gear display to the side of the stick. I have already removed from a parts car the shifter with attached linkage and the starter safety switch enclosed in a big metal cup. The plastic trim piece comes off the tunnel with all of the aforementioned. Is there a way to remove the shifter knob from its shaft so I can lift off the plastic trim? Or do I have to disassemble the linkage then pull the skinny end of the shifter shaft apart from the rest? I'd have to first remove the starter safety switch and keep going from there - lots of disassemble work just to replace a broken plastic trim gear display.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New remove plastic trim for shifter. Shifter knob is a big fat problem. [200]
posted by  DogsRGood subscriber  on Sun Jun 21 23:46 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.