Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 PCV 200

posted by  bgm1958 on  Sat Jun 27 18:51 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 5 18:10 CST 2014
[RELATED]

I have a '84 240 wagon with 350k-ish. I did the 'Robert DIY' test for my PCV system and it failed. It involves holding a glove on the open oil filler while the engine is running. If the PCV system is working the glove gets sucked flat; if the system is clogged the glove inflates. My glove inflated. I pulled off all the PCV components and made sure they were clean and free and I cleaned the throttle body making sure all the little ports were clear as well. It didn't fix it. I haven't had a problem with oil seeping out past the seals and the dipstick hasn't popped out either. I put this all before the congregation; do I have a problem or not and if I do what should I do about it? PS I changed the oil and filter while I was fiddling with the car.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 PCV [200]
posted by  bgm1958  on Sat Jun 27 18:51 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.