Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Strut Rebuild...Part Discontinued 900 1993

posted by  AVL940T on  Sun Jun 28 06:30 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I've been assembling all of the parts needed to rebuild my front struts and most of the suspension. I have bought all factory parts in hopes of not having to do this again too soon. There is one part that I'd like to replace that appears to be discontinued. Based on the parts diagram at Tasca it is the Upper Bearing Cover...

Upper Bearing Cover

Not having the struts apart and having never done this before, I'm not sure what is critical and in need of replacement and what is not. To be on the safe side, I've ordered everything available for the struts minus the springs and strut cylinders.

I would rather replace all of the rubber components. Should I keep looking for this part or reuse what I have? Do I even have the correct part number? Thanks.

Image and video hosting by TinyPic






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Strut Rebuild...Part Discontinued [900][1993]
posted by  AVL940T  on Sun Jun 28 06:30 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.